บริษัท แอพพลายด์ ไซแอนทิฟิค อินสตรูเม้นท์ส จำกัด มีความยินดีที่จะแจ้งให้ท่านทราบว่าตั้งแต่เดือนมกราคม พศ 2555 เป็นต้นไป บริษัท ฯ จะให้บริการรับทดสอบตัวอย่างสำหรับอุตสาหกรรมปิโตรเลียมเพื่อเป็นทางเลือกหนึ่งให้กับลูกค้า
ตัวอย่างที่ครอบคลุมการให้บริการได้แก่
- กลุ่มตัวอย่างน้ำมันพืช กลีเซอรีน (Vegetable Oil Testing)
- กลุ่มตัวทำละลายและสารเคมี (Chemical Testing) เช่น แอลกอฮอล์ ไฮโดรคาร์บอน สี ยาฆ่าแมลง หัวน้ำหอม เป็นต้น
- กลุ่มน้ำมันเชื้อเพลิง (Fuels & Alternative Fuels Testing) ได้แก่ น้ำมันเบนซิน น้ำมันดีเซล น้ำมันไบโอดีเซล น้ำมันแก๊สโซฮอล์ น้ำมันเครื่องบิน น้ำมันเตา เป็นต้น
- กลุ่มน้ำมันหล่อลื่น (Lubricant Testing) ได้แก่ น้ำมันเครื่อง น้ำมันหล่อลื่นพื้นฐาน น้ำมันหล่อลื่นอุตสาหกรรม น้ำมันหม้อแปลง เป็นต้น
- กลุ่มตัวอย่างจาระบีอุตสาหกรรม แว็กซ์ (Grease Testing)
- กลุ่มตัวอย่างยางมะตอย (Bitumen Testing)
| Test Code |
Test Description |
Test Method |
| 601 |
RDE Fine Metal Element |
AES-RDE / FL-D 6595 |
| 602 |
RFS Coarse Metal Element |
AES-RFS /FL-02-06 |
| 6031 |
FTIR Spectroscopy |
FTIR |
6032
6033 |
FTIR Spectroscopy ( antioxidant -turbine oil)
FTIR Spectroscopy (non routine and/or specific case) |
FTIR
FTIR |
| 604 |
Viscosity (Kinematic) at 40 0 c |
FL-D 445 |
| 605 |
Viscosity (Kinematic) at 100 0 c |
FL-D 445 |
| 606 |
Viscosity Index |
FL-D 2270 |
| 607 |
TAN ( Total Acid Number) |
FL-D 974 |
| 608 |
TBN ( Total Base Number) |
FL-D 4739 |
| 609 |
Ferrographic Analysis |
FLL Method |
| 610 |
Particle Count ( NAS 1638 and ISO 4406) |
NAS 1638
ISO 4406 |
6111
6112
6113 |
Flash Point, Rapid Flash Point Method
Flash Point by Cleveland Open Cup
Flash Point and Fire Point by Cleveland Open Cup |
FL-D 3828
FL-D 92
FL-D 92 |
| 6114 |
Flash Point by Pensky Martens Flash Closed Cup |
FL-D 93 |
| 621 |
Auto-Ignition Temperature |
ASTM E 659 |
| |
|
|
| 612 |
Water by distillation |
FL-D 95 |
| 613 |
Water by Karl Fisher Co-Distillation |
FL-D 6304
FL-D 1704 |
| 614 |
Fuel Dilution |
SAW |
| 615 |
Gravimetric Analysis |
Mod ASTM D-4898 |
| 616 |
VsPI TM (Varnish and Sludge Potential Index TM ) |
In-House |
| 617 |
RULER TM (Voltametry) |
ASTM D 6971-04
ASTM D 6810-02 |
| 618 |
Pentane Insolubles by membrane filtration |
Mod ASTM D 4505 |
| 619 |
Initial pH for Non Aqueous Liquid |
GE Jenbacher |
| 620 |
Color |
ASTM D 1500 |
| 660 |
RPVOT (previously known as RBOT) |
ASTM D 2272 |
661
6611
6612 |
Foaming Characteristic , sequence I , II & III Foaming
Characteristic , sequence I
Foaming Characteristic , sequence II & III |
ASTM D 892
ASTM D 892
ASTM D 892 |
| 662 |
Water Separability |
ASTM D 1401 |
| 663 |
Air Release Properties |
ASTM D 3427 |
| 664 |
Oil Filterability |
In-House |
| 665 |
Copper Strip Corrosion |
ASTM D 130 |
6661
6662 |
Rust Preventives
Rust Preventives |
ASTM D 665 -A
ASTM D 665 -B |
| 670 |
Dropping Point |
ASTM D 2265 |
| 671 |
Penetration , Unworked |
ASTM D 217 |
| 672 |
Penetration, Unworked |
ASTM D 1403 |
| 673 |
Scratch Test ( Deleterious Particles in Grease) |
ASTM D 1404 |
น้ำมันเชื้อเพลิง / Fuels
น้ำมันเบนซิน / Automotive Gasolines
| Test Code |
Test Description |
Test Method |
| D665 |
Anti-Rust Properties |
NACE TM-01-72; ASTM D665*, D6158, D3603*;
IP 135; ISO 7120; DIN 51585; FTM 791-4011; NF T 60-151 |
| E659 |
Autoignition Temperature |
ASTM E659 |
D156
D1500 |
Saybolt Color
ASTM Color |
ASTM D156; DIN 51411; FTM 791-101; NF M 07-003
ASTM D1500, D6074; IP 196; ISO 2049; FTM 791-102 |
| D130 |
Copper Corrosion |
ASTM D130; IP 154 FSPT DT-28-65; ISO 2160; DIN 51759; FTM 791-5325; NF M 07-015 |
| E100 |
Density |
ASTM E100 |
| D381 |
Existent Gum by Evaporation |
ASTM D381; IP 131; ISO 6246; DIN 51784; FTM 791-3302; NF M 07-004 |
| D56 |
Flash Point (Tag Closed)
|
ASTM D56; IP 304
|
| D445 |
Kinematic Viscosity |
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 |
D2547
D189 |
Lead in Gasoline, Acidity, Salt Content
Conradson Carbon Residue of Petroleum Products |
ASTM D2547; IP 77, 182, 248; ISO 2083; NF M 07-014, 07-023
ASTM D189, D6074; ANS Z-11.25; IP 13; ISO 6615;
DIN 51551; FTM 791-5001; NF T 60-116 |
| D2699, D2700 |
Octane Analyzer |
ASTM D2699, D2700 |
| D525 |
Oxidation Stability |
ASTM D525, D873; IP 40, IP 138; ISO 7536; DIN 51780, 51799; FTM 791-3352, 791-3354; NF M 07-012, 07-013 |
| D3278 |
Rapid Flash Point Tester |
ASTM D3278, D3828, D4206; IP 303; ISO 3679, ISO 3680, ISO 9038; DOT CFR 49-173.115; IATA |
| D323 |
Reid Vapor Pressure |
ASTM D323, D1267; GPA 2140; IP 69, 161;
ISO 3007, 4256; DIN 51616, 51754; FTM 791-1201 |
D 1533, D4928,
D6304 |
Water Content (Karl Fischer Titrator) |
ASTM D 1533, D4928, D6304, IP 386, IP 438, API MPMS Chap. 10.9, BS 60814, ISO 10101-3, ISO 10337, ISO 12937 |
น้ำมันเครื่องบิน / Aviation Fuels
| Test Code |
Test Description |
Test Method |
| ASTM D130 |
Copper Corrosion |
ASTM D130; IP 154 FSPT DT-28-65; ISO 2160; DIN 51759; FTM 791-5325; NF M 07-015 |
| ASTM E100 |
Density |
ASTM E100 |
| ASTM D86 |
Distillation |
ASTM D86, D216, D233, D447, D850, D1078, E133; IP 123, 195; ISO 3405; DIN 51751; FTM 791- 1001, 791-1015; NF M 07-002 |
| ASTM D381 |
Existent Gum by Evaporation |
ASTM D381; IP 131; ISO 6246; DIN 51784;
FTM 791-3302; NF M 07-004 |
| ASTM D93 |
Flash Point (Pensky-Martens) |
ASTM D93; IP 34; ISO 2719; DIN EN 22719;
NF M 07-019; JIS K2265 |
| ASTM D56 |
Flash Point (Tag Closed) |
ASTM D56; IP 304 |
| ASTM D2386 |
Freezing Point |
ASTM D2386; IP 16; ISO 3013; DIN 51421; FTM 791-1411; NF M 07-048 |
| ASTM D445 |
Kinematic Viscosity |
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 |
| ASTM D2547
ASTM D189 |
Lead in Gasoline, Acidity, Salt Content
Conradson Carbon Residue of Petroleum Products |
ASTM D2547; IP 77, 182, 248; ISO 2083; NF M 07-014, 07-023
ASTM D189, D6074; ANS Z-11.25; IP 13; ISO 6615;
DIN 51551; FTM 791-5001; NF T 60-116 |
| ASTM D525 |
Oxidation Stability |
ASTM D525, D873; IP 40, IP 138; ISO 7536;
DIN 51780, 51799; FTM 791-3352, 791-3354; NF M 07-012, 07-013 |
| ASTM D3828 |
Rapid Flash Point Tester |
ASTM D3278, D3828, D4206; IP 303; ISO 3679, ISO 3680, ISO 9038;
DOT CFR 49-173.115; IATA |
| ASTM D323 |
Reid Vapor Pressure |
ASTM D323, D1267; GPA 2140; IP 69, 161;
ISO 3007, 4256; DIN 51616, 51754; FTM 791-1201 |
| ASTM D4057 |
Sampling |
ASTM D4057 (formerly ASTM D270), D6074 or
ASTM D1265 specifications. |
| ASTM D156 |
Saybolt Color |
ASTM D156; DIN 51411; FTM 791-101; NF M 07-003 |
| D4814 |
Silver Corrosion |
IP 227; ASTM D130, D4814, D6074, D6158; FSPT DT-28-65; IP 154; ISO 2160; DIN 51759; FTM 791-5325 |
| ASTM D1322 |
Smoke Point |
ASTM D1322; ISO 3014; IP 57;
DIN 51406; FTM 791-2107; NF M 07-028 |
| ASTM D2384 |
Sulfur Content |
ASTM D2384, D2747, D2784, D2785; GPA 2140; IP 243; ISO 4260; DIN EN 41; NF T 60-142 |
น้ำมันไบโอดีเซล / Biodiesel Fuels
| Test Code |
Test Description |
Test Method |
| D189 |
Carbon Residue, % Wt Lead in Gasoline, Acidity, Salt Content |
ASTM D86, D285, D850, D1078, D4737; D189 Section 10; DIN 51751; ISO 3405; IP 123; JIS J2254l; NF M 07-002 ASTM D2547; IP 77, 182, 248; ISO 2083; NF M 07-014, 07-023 |
| |
Cetane Index |
ASTM D86, D285, D850, D1078, D4737; D189 Section 10; DIN 51751; ISO 3405; IP 123; JIS J2254l; NF M 07-002 |
| D2500 |
Cloud Point |
ASTM D97, D2500, D5853, D6074, D6158; IP 15, 219;
ISO 3015, 3016; DIN 51597; FTM 791-201; NF T 60-105 |
| ASTM D130 |
Copper Corrosion |
ASTM D130; IP 154 FSPT DT-28-65; ISO 2160; DIN 51759; FTM 791-5325; NF M 07-015 |
| ASTM D1160 |
Distillation Vacuum |
ASTM D1160; ISO 6616 |
| ASTM D86 |
Distillation, °C |
ASTM D86, D216, D233, D447, D850, D1078, E133; IP 123, 195; ISO 3405; DIN 51751; FTM 791- 1001, 791-1015; NF M 07-002 |
| ASTM D93 |
Flash Point |
ASTM D93; AASHTO T73-811; IP 34; ISO 2719; DIN 51758; FTM 791-1102; NF M 07-019 |
| ASTM D5001 |
Fuel Lubricity Bocle |
ASTM D5001 |
| ASTM D6079 |
Fuel Lubricity HFRR |
ASTM D6079 |
| ASTM D445 |
Kinematic Viscosity @ 40°C |
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 |
| ASTM D91 |
Water and Sediment |
ASTM D91, D96, D893, D1796, D2273, D2709, D2711, D4007; IP 75, 145, 359; API 2542, 2548; ISO 3734; DIN 51793; NF M 07-020 |
น้ำมันดีเซล เชื้อเพลิงเผาไหม้ / Burner, Diesel & Industrial Gas Turbine Fuels
| Test Code |
Test Description |
Test Method |
| ASTM E100 |
API Gravity |
ASTM E100 |
| ASTM D1500 |
ASTM Color |
ASTM D1500, D6074; IP 196; ISO 2049; FTM 791-102 |
| ASTM E100 |
Density |
ASTM E100 |
| ASTM D86 |
Distillation |
ASTM D86, D216, D233, D447, D850, D1078, E133; IP 123, 195; ISO 3405; DIN 51751; FTM 791- 1001, 791-1015; NF M 07-002 |
| ASTM D381 |
Existent Gum |
ASTM D381; IP 131; ISO 6246; DIN 51784; FTM 791-3302; NF M 07-004 |
| ASTM D93 |
Flash Point (Pensky-Martens) |
ASTM D93; IP 34; ISO 2719; DIN EN 22719; NF M 07-019; JIS K2265 |
| ASTM D56 |
Flash Point (Tag Closed) |
ASTM D56; IP 304 |
| ASTM D445 |
Kinematic Viscosity |
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 |
| ASTM D525 |
Oxidation Stability |
ASTM D525, D873; IP 40, IP 138; ISO 7536; DIN 51780, 51799; FTM 791-3352, 791-3354; NF M 07-012, 07-013 |
| ASTM D97 |
Pour Point |
ASTM D97, D2500, D5853, D6074, D6158; IP 15, 219; ISO 3015, 3016; DIN 51597; FTM 791-201; NF T 60-105 |
| ASTM D524 |
Ramsbottom Carbon Residue |
ASTM D524, D6074; IP 14; ISO 4262; FTM 791-5002; NF T 60-117 |
| ASTM D3278 |
Rapid Flash Point Tester |
ASTM D3278, D3828, D4206; IP 303; ISO 3679, ISO 3680, ISO 9038; DOT CFR 49-173.115; IATA |
| ASTM D4057 |
Sampling |
ASTM D4057 (formerly ASTM D270), D6074 or
ASTM D1265 specifications. |
น้ำมันดีเซล / Diesel Fuels
| Test Code |
Test Description |
Test Method |
| ASTM E100 |
API Gravity |
ASTM E100 |
| D2500 |
Cloud Point |
ASTM D97, D2500, D5853, D6074, D6158; IP 15, 219; ISO 3015, 3016; DIN 51597; FTM 791-201; NF T 60-105 |
| D6371 |
Cold Filter Plugging Point |
ASTM D6371; IP 309; DIN 51428 |
| ASTM D130 |
Copper Corrosion |
ASTM D130; IP 154 FSPT DT-28-65; ISO 2160; DIN 51759; FTM 791-5325; NF M 07-015 |
| ASTM D86 |
Distillation |
ASTM D86, D216, D233, D447, D850, D1078, E133; IP 123, 195; ISO 3405; DIN 51751; FTM 791- 1001, 791-1015; NF M 07-002 |
| ASTM D381 |
Existent Gum |
ASTM D381; IP 131; ISO 6246; DIN 51784; FTM 791-3302; NF M 07-004 |
| ASTM D93 |
Flash Point (Pensky-Martens) |
ASTM D93; IP 34; ISO 2719; DIN EN 22719; NF M 07-019; JIS K2265 |
| ASTM D445 |
Kinematic Viscosity |
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 |
|
In-line Viscosity |
|
| D525 |
Oxidation Stability |
ASTM D525, D873; IP 40, IP 138; ISO 7536; DIN 51780, 51799; FTM 791-3352, 791-3354; NF M 07-012, 07-013 |
| D97 |
Pour Point |
ASTM D97, D2500, D5853, D6074, D6158; IP 15, 219; ISO 3015, 3016; DIN 51597; FTM 791-201; NF T 60-105 |
| D524 |
Ramsbottom Carbon Residue |
ASTM D524, D6074; IP 14; ISO 4262; FTM 791-5002; NF T 60-117 |
| D3278 |
Rapid Flash Point Tester |
ASTM D3278, D3828, D4206; IP 303; ISO 3679, ISO 3680, ISO 9038; DOT CFR 49-173.115; IATA |
| D665 |
Rust Preventing Characteristics |
ASTM D665, D3603, D6158; NACE TM-01-72*; IP 135; ISO 7120; DIN 51355**, DIN 51585; FTM 791-4011, 791-5315**; NF T 60-151 |
| D3117 |
Wax Appearance Point |
D3117 |
น้ำมันเตา / Fuel Oils
| Test Code |
Test Description |
Test Method |
| ASTM E100 |
API Gravity |
ASTM E100 |
| ASTM D1500 |
ASTM Color |
ASTM D1500, D6074; IP 196; ISO 2049; FTM 791-102 |
| ASTM D130; |
Copper Corrosion |
ASTM D130; IP 154 FSPT DT-28-65; ISO 2160; DIN 51759; FTM 791-5325; NF M 07-015 |
| ASTM D86, |
Distillation |
ASTM D86, D216, D233, D447, D850, D1078, E133; IP 123, 195; ISO 3405; DIN 51751; FTM 791- 1001, 791-1015; NF M 07-002 |
| ASTM D93 |
Flash Point (Pensky-Martens) |
ASTM D93; IP 34; ISO 2719; DIN EN 22719;
NF M 07-019; JIS K2265 |
| ASTM D56 |
Flash Point (Tag Closed) |
ASTM D56; IP 304 |
| ASTM D6703 |
Flocculation |
ASTM D6703 |
| ASTM D445 |
Kinematic Viscosity |
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 |
| ASTM D525 |
Oxidation Stability |
ASTM D525, D873; IP 40, IP 138; ISO 7536; DIN 51780, 51799; FTM 791-3352, 791-3354; NF M 07-012, 07-013 |
| ASTM D97 |
Pour Point |
ASTM D97, D2500, D5853, D6074, D6158; IP 15, 219; ISO 3015, 3016; DIN 51597; FTM 791-201; NF T 60-105 |
| ASTM D524 |
Ramsbottom Carbon Residue |
ASTM D524, D6074; IP 14; ISO 4262; FTM 791-5002; NF T 60-117 |
| ASTM D3278 |
Rapid Flash Point Tester |
ASTM D3278, D3828, D4206; IP 303; ISO 3679, ISO 3680, ISO 9038; DOT CFR 49-173.115; IATA |
| ASTM D4057 |
Sampling |
ASTM D4057 (formerly ASTM D270), D6074 or
ASTM D1265 specifications. |
| ASTM D473 |
Sediment Extraction Water & Sediment |
ASTM D473; IP 53; ISO 3735; DIN 51789; FTM 791-3002; NF M 07-010 ASTM D91, D96, D893, D1796, D2273, D2709, D2711, D4007; IP 75, 145, 359; API 2542, 2548; ISO 3734; DIN 51793; NF M 07-020 |
| ASTM D95 |
Water Content by Distillation |
ASTM D95, E123, D244, D370*; AASHTO T55, T59; API MPMS Ch. 10.5; IP 74, 291; FTM 791-3001; ISO 3733; NF T 60-113 |
| ASTM D 1533 |
Water Content (Karl Fischer Titrator) |
ASTM D 1533, D4928, D6304, IP 386, IP 438, |
| ASTM D1160 |
Vacuum Distillation |
ASTM D1160; ISO 6616 |
ก๊าซโซฮอลล์ / Gasohol
| Test Code |
Test Description |
Test Method |
| ASTM D130 |
Copper Corrosion |
ASTM D130; IP 154 FSPT DT-28-65; ISO 2160; DIN 51759; FTM 791-5325; NF M 07-015 |
| ASTM D86 |
Distillation |
ASTM D86, D285, D850, D1078, D4737; D189 Section 10; DIN 51751; ISO 3405; IP 123; JIS J2254l; NF M 07-002 |
| ASTM D381 |
Existent Gum by Evaporation |
ASTM D381; IP 131; ISO 6246; DIN 51784;
FTM 791-3302; NF M 07-004 |
ASTM D2547
ASTM D189 |
Lead in Gasoline, Acidity, Salt Content Conradson Carbon Residue of Petroleum Products |
ASTM D2547; IP 77, 182, 248; ISO 2083; NF M 07-014, 07-023
ASTM D189, D6074; ANS Z-11.25; IP 13; ISO 6615; DIN 51551; FTM 791-5001; NF T 60-116 |
| ASTM D525 |
Oxidation Stability |
ASTM D525, D873; IP 40, IP 138; ISO 7536; DIN 51780, 51799; FTM 791-3352, 791-3354; NF M 07-012, 07-013 |
| ASTM D323 |
Reid Vapor Pressure |
ASTM D323, D1267; GPA 2140; IP 69, 161;
ISO 3007, 4256; DIN 51616, 51754; FTM 791-1201 |
| ASTM D665 |
Rust Preventing Characteristics |
ASTM D665, D3603, D6158; NACE TM-01-72*; IP 135; ISO 7120; DIN 51355**, DIN 51585; FTM 791-4011, 791-5315**; NF T 60-151 |
| ASTM D2384 |
Sulfur Content by Oxy-Hydro Burner |
ASTM D2384, D2747, D2784, D2785; GPA 2140; IP 243; ISO 4260; DIN EN 41; NF T 60-142 |
น้ำมันก๊าด / Kerosene
| Test Code |
Test Description |
Test Method |
| ASTM D130 |
Copper Corrosion |
ASTM D130; IP 154 FSPT DT-28-65; ISO 2160; DIN 51759; FTM 791-5325; NF M 07-015 |
| ASTM D86 |
Distillation |
ASTM D86, D285, D850, D1078, D4737; D189 Section 10; DIN 51751; ISO 3405; IP 123; JIS J2254l; NF M 07-002 |
| ASTM D56 |
Flash Point (Tag Closed) |
ASTM D56; IP 304 |
| ASTM D2386 |
Freezing Point96-97 |
ASTM D2386; IP 16; ISO 3013; DIN 51421; FTM 791-1411; NF M 07-048 |
| ASTM D445 |
Kinematic Viscosity |
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 |
| ASTM D3278 |
Rapid Flash Point Tester38 |
ASTM D3278, D3828, D4206; IP 303; ISO 3679, ISO 3680, ISO 9038; |
| ASTM D156 |
Saybolt Color |
ASTM D156; DIN 51411; FTM 791-101; NF M 07-003 |
| ASTM D1322 |
Smoke Point |
ASTM D1322; ISO 3014; IP 57; DIN 51406; FTM 791-2107; NF M 07-028 |
|
In-line Viscosity |
|
ปิโตรเลียมเหลว / Liquefied Petroleum Gas (LPG)
| Test Code |
Test Description |
Test Method |
| ASTM D1838 |
Copper Strip Corrosion |
ASTM D1838; GPA 2140; ISO 6251 |
| ASTM D1657 |
Density |
ASTM D1657; GPA 2140; IP 235; IS0 3993; NF M 41-008 |
| ASTM D3588 |
GC (portable) |
ASTM D3588; ISO 6976; GPA 2172 |
| ASTM D1837 |
Residues in LPG |
ASTM D1837; D2158; GPA 2140; ISO 13757 |
| ASTM D4057 . |
Sampling |
ASTM D4057 (formerly ASTM D270), D6074 or ASTM D1265 specifications. |
| ASTM D2384 |
Sulfur Content |
ASTM D2384, D2747, D2784, D2785; GPA 2140; IP 243; ISO 4260; DIN EN 41; NF T 60-142 |
| ASTM D323 |
Vapor Pressure |
ASTM D323, D1267; GPA 2140; IP 69, 161; ISO 3007, 4256; DIN 51616, 51754; FTM 791-1201 |
| ASTM D1837 |
Volatility |
ASTM D1837; D2158; GPA 2140; ISO 13757 |
น้ำมันหล่อลื่น / Lubricants
น้ำมันหล่อลื่นอากาศยาน / Aircraft Engine Lubricant
| Test Code |
Test Description |
Test Method |
| ASTM E100 |
API Gravity |
ASTM E100 |
| ASTM D189 |
Conradson Carbon Residue |
ASTM D189, D6074; ANS Z-11.25; IP 13; ISO 6615; DIN 51551; FTM 791-5001; NF T 60-116 |
| ASTM D130 |
Copper Corrosion |
ASTM D130, D6074, D6158 |
| ASTM D943 |
Corrosiveness and Oxidation Stability |
ASTM D943, D2274, D2440, D2893, D4310, D4636, D5968, D6594; DIN 51394, 51586, 51587; FTM 791-5307, 791-5308; |
| ASTM D92 |
Flash and Fire Points (Cleveland)33, 36 |
ASTM D92; IP 36; ISO 2592 |
| ASTM D892 |
Foaming Characteristics |
ASTM D892; IP 146; DIN 51566; FTM 791-3211, 791-3213*; NF T 60-129 |
| ASTM D445 |
Kinematic Viscosity |
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 |
|
In-line Viscosity21 |
|
| ASTM D5304 |
Oxy Overpressure Method for Fuel Storage Stability |
ASTM D5304 |
| ASTM D97 |
Pour Point |
ASTM D97, D2500, D5853, D6074, D6158; IP 15, 219;
ISO 3015, 3016; DIN 51597; FTM 791-201; NF T 60-105 |
| ASTM D3278 |
Rapid Flash Point Tester |
ASTM D3278, D3828, D4206; DOT CFR 49-173.115; IATA; |
| ASTM D4057 |
Sampling |
ASTM D4057 (formerly ASTM D270), D6074 or
ASTM D1265 |
| ASTM D91 |
Water & Sediment Content by Centrifuge Method |
ASTM D91, D96, D893, D1796, D2273, D2709, D2711, D4007; IP 75, 145, 359; API 2542, 2548; ISO 3734; DIN 51793; NF M 07-020 |
| ASTM D |
Water Content (Karl Fischer Titrator) |
ASTM D 1533, D4928, D6304, IP 386, IP 438, |
| ASTM D3117 |
Wax Appearance Point |
ASTM D3117 |
น้ำมันหล่อลื่นยานยนต์ / Automatic Transmission Fluid
| Test Code |
Test Description |
Test Method |
| ASTM D130, |
Copper Corrosion |
ASTM D130, D6074, D6158 |
| ASTM E100 |
Density |
ASTM E100 |
| ASTM D892 |
Foaming Characteristics |
ASTM D892; IP 146; DIN 51566; FTM 791-3211, 791-3213*; NF T 60-129 |
| ASTM D665 |
Rust Preventing Characteristics 128-129 |
ASTM D665, D3603, D6158; NACE TM-01-72*; IP 135; ISO 7120; DIN 51355**, DIN 51585; FTM 791-4011, 791-5315**; NF T 60-151 |
น้ำมันหล่อลื่นยานยนต์ / Automotive Engine Oil
| Test Code |
Test Description |
Test Method |
| E100 |
API Gravity |
ASTM E100 |
| ASTM D1500 |
ASTM Color Portable Automated Colorimeter |
ASTM D1500, D6074; IP 196; ISO 2049; FTM 791-102 ASTM D156, D1209, D1500, D1544; ISO 4630, 6271;
DIN 6162; NF M 07-003; NF T 60-104 |
| ASTM D189 |
Conradson Carbon Residue |
ASTM D189, D6074; ANS Z-11.25; IP 13; ISO 6615;
DIN 51551; FTM 791-5001; NF T 60-116 |
| ASTM E100 |
Density |
ASTM E100 |
| ASTM D1160 |
Distillation at Reduced Pressures VDA9000 Automatic Vacuum Distillation |
ASTM D1160; ISO 6616 ASTM D2892 and D5236 |
| ASTM D92 |
Flash and Fire Points (Cleveland) |
ASTM D92; IP 36; ISO 2592 |
| ASTM D1310 |
Flash and Fire Points (Tag Open) |
ASTM D1310, D3143 |
| ASTM D93 |
Flash Point (Pensky-Martens) |
ASTM D93; IP 34; ISO 2719; DIN EN 22719;
NF M 07-019; JIS K2265 |
| ASTM D56 |
Flash Point (Tag Closed) |
ASTM D56; IP 304 |
| ASTM D892 |
Foaming Characteristics |
ASTM D892; IP 146; DIN 51566; FTM 791-3211, 791-3213*; NF T 60-129 |
| ASTM D445 |
Kinematic Viscosity |
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 |
| ASTM D2983 |
Low Temperature Brookfield Viscosity |
ASTM D2983 |
|
Micro-oxidation Test |
|
| ASTM D5800 |
Noack Test136 |
ASTM D5800; DIN 51581 |
| ASTM D97 |
Pour Point |
ASTM D97, D2500, D5853, D6074, D6158; IP 15, 219;
ISO 3015, 3016; DIN 51597; FTM 791-201; NF T 60-105 |
| ASTM D524 |
Ramsbottom Carbon Residue |
ASTM D524, D6074; IP 14; ISO 4262; FTM 791-5002; NF T 60-117 |
| ASTM D3278 |
Rapid Flash Point Tester |
ASTM D3278, D3828, D4206; IP 303; ISO 3679, ISO 3680, ISO 9038; DOT CFR 49-173.115; IATA |
| ASTM D156 |
Saybolt Color |
ASTM D156; DIN 51411; FTM 791-101; NF M 07-003 |
| ASTM D1533 |
Water Content (Karl Fischer Titrator) |
ASTM D 1533, D4928, D6304, IP 386, IP 438, API MPMS |
| ASTM D95 |
Water Content by Distillation |
ASTM D95, E123, D244, D370*; AASHTO T55, T59; API MPMS Ch. 10.5; IP 74, 291; FTM 791-3001; ISO 3733; NF T 60-113 |
จาระบียานยนต์ / Automotive Lubricating Grease
| Test Code |
Test Description |
Test Method |
| ASTM D3427 |
Air Release Value |
ASTM D3427; IP 313; DIN 51381; NF E 48-614 |
| ASTM D1092 |
Apparent Viscosity |
ASTM D1092 |
| ASTM D1743 |
Corrosiveness Preventive Properties |
ASTM D1743-73, FTM 791-4012 |
| ASTM D566 |
Dropping Point Dropping Point of Lubricating Grease
Over Wide Temperature Range |
ASTM D566, D4950; IP 132; ISO 2176; DIN 51801; FTM 791-1421; NF T 60-102 ASTM D2265, ASTM D4950 |
| ASTM D972 |
Evaporation Loss |
ASTM D972, D2878; IP 183; FTM 791-351 |
| ASTM D1263 |
Leakage Tendencies |
ASTM D1263; FTM 791-3454 |
| ASTM D3527 |
Life Performance |
ASTM D3527, D4290, D4950 |
| ASTM D2983 |
Low Temperature Brookfield Viscosity |
ASTM D2983; IP 267 Method A; ISO 9262; CEC-L-18A |
| ASTM D1478 |
Low Temperature Torque |
ASTM D1478, D4693, D4950; FTM 791-334 |
| ASTM D942 |
Oxidation Stability |
ASTM D942; IP 142; DIN 51808; FTM 791-3453 |
| ASTM D5 |
Penetration |
ASTM D5, D217, D937, D1321, D1403, D2884, D4950; IP 49, 50, 179, 310; ISO 2137; DIN 51579, 51580, 51804; FTM 791-311, 791-312, 791-313; AOCS Cc 16-60; AACC 58-14; NFT 60-119, 60-123, 60-132,
66-004 |
| ASTM D1748 |
Rust Protection |
ASTM D1748; FTM 791-5310 |
น้ำมันเกียร์ / Gear Oils
| Test Code |
Test Description |
Test Method |
| ASTM D130 |
Copper Corrosion |
ASTM D130, D6074, D6158 |
| ASTM D2711 |
Demulsibility Characteristics |
ASTM D2711, DIN 51353 |
| ASTM D892 |
Foaming Characteristics |
ASTM D892; IP 146; DIN 51566; FTM 791-3211, 791-3213*; NF T 60-129 |
| ASTM D445 |
Kinematic Viscosity |
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 |
| ASTM D943 |
Oxidation Stability |
ASTM D943, D2274, D2893*, D4310, D6158; AOCS CD12-57** DIN 51586, 51587; ISO 4263, ISO 12205; NF M 07-047; NF T 60-150 |
|
Rust Preventing Characteristics 129-129 |
|
| ASTM D88 |
Saybolt Viscosity |
ASTM D88, D244, E102; AASHTO T72; FTM 791-304 |
| ASTM D665 |
Thermal Oxidation Stability |
ASTM D665, D3603, D6158; NACE TM-01-72*; IP 135; ISO 7120; DIN 51355**, DIN 51585; FTM 791-4011, 791-5315**; NF T 60-151 |
| ASTM D1533 |
Water Content (Karl Fischer Titrator) |
ASTM D 1533, D4928, D6304, IP 386, IP 438, API MPMS |
น้ำมันไฮโดรลิค และงานโลหะ / Hydraulic and Metalworking Fluids
| Test Code |
Test Description |
Test Method |
| ASTM D943 |
Corrosiveness and Oxidation Stability |
ASTM D943, D2274, D2440, D2893, D4310, D4636, D5968, D6594; DIN 51394, 51586, 51587; FTM 791-5307, 791-5308; UOT** |
| ASTM D92 |
Flash and Fire Points (Cleveland) |
ASTM D92; IP 36; ISO 2592 |
| ASTM D2266 |
Four Ball Wear Test |
ASTM D2266, D2596, D2783, D4172, D5183*, IP 239 |
|
Micro-oxidation Test 166 |
|
| ASTM D6184 |
Oil Separation |
ASTM D6184 and FTM 791-321 |
| ASTM D2112 |
Oxidation Stability |
ASTM D2112, D2272 and IP 229 |
| ASTM D1831 |
Roll Stability |
ASTM D1831, MIL-G-10924SA |
| ASTM D1264 |
Water Washout Characteristics |
ASTM D1264, D4950; IP 215; FTM 791-3252 |
น้ำมันหล่อลื่นเครื่องจักร / Steam Turbine Lubricating Oils
| Test Code |
Test Description |
Test Method |
| ASTM D3427 |
Air Release Properties of Petroleum Oils |
ASTM D3427; IP 313; DIN 51381; NF E 48-614 |
| ASTM D130 |
Copper Corrosion |
ASTM D130, D6074, D6158 |
| ASTM D92 |
Flash and Fire Points (Cleveland) |
ASTM D92; IP 36; ISO 2592 |
| ASTM D892 |
Foaming Characteristics |
ASTM D892; IP 146; DIN 51566; FTM 791-3211, 791-3213*; NF T 60-129 |
| ASTM D445 |
Kinematic Viscosity |
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 |
| ASTM D5800 |
Noack Test |
ASTM D5800; DIN 51581 |
| ASTM D943 |
Oxidation Characteristics |
ASTM D943, D2274, D2893*, D4310, D6158; AOCS CD12-57** DIN 51586, 51587; ISO 4263, ISO 12205; NF M 07-047; NF T 60-150 |
| ASTM D2112 |
Oxidation Stability (RBOT) |
ASTM D2112, D2272 and IP 229 |
| ASTM D97 |
Pour Point |
ASTM D97, D2500, D5853, D6074, D6158; IP 15, 219; ISO 3015, 3016; DIN 51597; FTM 791-201; NF T 60-105 |
| ASTM D3278 |
Rapid Flash Point Tester |
ASTM D3278, D3828, D4206; DOT CFR 49-173.115; IATA; |
| ASTM D665 |
Rust Preventing Characteristics |
ASTM D665, D3603, D6158; NACE TM-01-72*; IP 135; ISO 7120; DIN 51355**, DIN 51585; FTM 791-4011, 791-5315**; NF T 60-151 |
| ASTM D4057 |
Sampling |
ASTM D4057 (formerly ASTM D270), D6074 or ASTM D1265 |
| ASTM
D1533 |
Water Content (Karl Fischer Titrator) |
ASTM D 1533, D4928, D6304, IP 386, IP 438, API MPMS |
| ASTM D1401 |
Water Separability |
ASTM D1401, D6074, D6158; ISO 6614;
DIN 51599; FTM 791-3201; NF T 60-125 |
น้ำมันเทอร์บายด์และน้ำมันสังเคราะห์ / Turbine Oils and Synthetic Lubricants
| Test Code |
Test Description |
Test Method |
| D3427 |
Air Release Properties of Petroleum Oils |
ASTM D3427; IP 313; DIN 51381; NF E 48-614 |
| D93 |
Flash Point (Pensky-Martens) |
ASTM D93; IP 34; ISO 2719; DIN EN 22719;
NF M 07-019; JIS K2265 |
| D892 |
Foaming Characteristics |
ASTM D892; IP 146; DIN 51566; FTM 791-3211, 791-3213*; NF T 60-129 |
| D445 |
Kinematic Viscosity |
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 |
| D5800 |
Noack Test |
ASTM D5800; DIN 51581 |
| D2272 |
Oxidation Stability (RBOT/TFOUT) |
ASTM D2112, D2272 and IP 229 |
| D97 |
Pour Point |
ASTM D97, D2500, D5853, D6074, D6158; IP 15, 219; ISO 3015, 3016; DIN 51597; FTM 791-201; NF T 60-105 |
| D3278 |
Rapid Flash Point Tester |
ASTM D3278, D3828, D4206; IP 303; ISO 3679, ISO 3680, ISO 9038; DOT CFR 49-173.115; IATA |
แว็กซ์และยางมะตอย / Wax & Bituminous Materials
| Test Code |
Test Description |
Test Method |
| ASTM D1465 |
Blocking and Picking Point |
ASTM D1465; TAPPI T652 |
| ASTM D113 |
Ductility |
ASTM D113; P226; AASHTO T51; ANS A37.11; Federal Specification SS-R-406C;
USDA Method 5 (BUL 12-16); DIN 52013 |
| ASTM D92 |
Flash and Fire Points (Cleveland) |
ASTM D92; IP 36; ISO 2592 |
| ASTM D56 |
Flash Point (Tag Open) |
ASTM D56; IP 304 |
| ASTM D139 |
Float Test |
ASTM D139, AASHTO T50 and ANS A37.2 |
| ASTM D87 |
Melting Point of Waxes |
ASTM D87; IP 55; ISO 3841; DIN 51570; FTM 791-1402; NF T 60-114 |
| ASTM D244 |
Oil Distillate in Emulsified Asphalts |
ASTM D244 and AASHT0 T59 |
| ASTM D5 |
Penetration |
ASTM D5, D217, D937, D1321, D1403, D2884, D4950; IP 49, 50, 179, 310; ISO 2137; DIN 51579, 51580, 51804; FTM 791-311, 791-312, 791-313; AOCS Cc 16-60; AACC 58-14; NFT 60-119, 60-123, 60-132,
66-004 |
| ASTM D3278 |
Rapid Flash Point Tester |
ASTM D3278, D3828, D4206; IP 303; ISO 3679, ISO 3680, ISO 9038; DOT CFR 49-173.115; IATA |
| ASTM D2872 |
Rolling Thin-Film Oven Test |
ASTM D2872 |
| ASTM D88 |
Saybolt Viscosity |
ASTM D88, D244, E102; AASHTO T72; FTM 791-304 |
| ASTM D36 |
Softening Point |
ASTM D36, E28; AASHTO T53; IP 58; ISO 4625; DIN 52011; NF T 66-008; EN 1427, 13179 |
| ASTM P226 |
Tensile Strength |
ASTM P226 |
| ASTM D445 |
Viscosity by Vacuum Capillary Viscometer |
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 |
| ASTM D95 |
Water Content by Distillation |
ASTM D95, E123, D244, D370*; AASHTO T55, T59; API MPMS Ch. 10.5; IP 74, 291; FTM 791-3001; ISO 3733; NF T 60-113 |
น้ำมันหม้อแปลงไฟฟ้า / Electrical Insulating Oils
| Test Code |
Test Description |
Test Method |
| ASTM D611 |
Aniline Point |
ASTM D611; IP 2; ISO 2977; DIN 51775; FTM 791-3601; NF M 07-021 |
| ASTM D1500 |
ASTM Color |
ASTM D1500, D6074; IP 196; ISO 2049; FTM 791-102 |
| ASTM D3278 |
Flash and Fire Points (Cleveland) |
ASTM D3278, D3828, D4206; IP 303; ISO 3679, ISO 3680, ISO 9038; DOT CFR 49-173.115; IATA |
| ASTM D445 |
Kinematic Viscosity |
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 |
| ASTM D2112 |
Oxidation Stability (RBOT/TFOUT) |
ASTM D2112, D2272 and IP 229 |
| ASTM D97 |
Pour Point |
ASTM D97, D2500, D5853, D6074, D6158; IP 15, 219; ISO 3015, 3016; DIN 51597; FTM 791-201; NF T 60-105 |
| ASTM D88 |
Saybolt Viscosity |
ASTM D88, D244, E102; AASHTO T72; FTM 791-304 |
| ASTM D1524 |
Visual Examination45 |
ASTM D1524 |
ตัวทำละลาย / Solvents
| Test Code |
Test Description |
Test Method |
| ASTM D611 |
Aniline Point |
ASTM D611; IP 2; ISO 2977; DIN 51775; FTM 791-3601; NF M 07-021 |
| ASTM D323 |
API Gravity |
ASTM D323, D1298, D6074, D6158 |
| ASTM D1500 |
ASTM Color |
ASTM D1500, D6074; IP 196; ISO 2049; FTM 791-102 |
| ASTM D130 |
Copper Corrosion |
ASTM D130, D6074, D6158; FSPT DT-28-65; IP 154; ISO 2160; DIN 51759; FTM 791-5325; NF M 07-015 |
| ASTM D86 |
Distillation |
ASTM D86, D216, D233, D447, D850, D1078, E133; IP 123, 195; ISO 3405; DIN 51751; FTM 791-
1001, 791-1015; NF M 07-002 |
| ASTM D93 |
Flash Point (Pensky-Martens) |
ASTM D93; IP 34; ISO 2719; DIN EN 22719;
NF M 07-019; JIS K2265 |
| ASTM D56 |
Flash Point (Tag Closed) |
ASTM D56; IP 304 |
| ASTM D445 |
Kinematic Viscosity |
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 |
| ASTM D3278 |
Rapid Flash Point Tester |
ASTM D3278, D3828, D4206; IP 303; ISO 3679, ISO 3680, ISO 9038; DOT CFR 49-173.115; IATA |
| ASTM D4057 ( |
Sampling |
ASTM D4057 (formerly ASTM D270), D6074 or ASTM D1265 |
| ASTM D156 |
Saybolt Color44, 46-47 |
ASTM D156; DIN 51411; FTM 791-101; NF M 07-003 |
| ASTM D323 |
Vapor Pressure |
ASTM D323, D1267; GPA 2140; IP 69, 161;
ISO 3007, 4256; DIN 51616, 51754; FTM 791-1201 |
| ASTM D1837 |
Volatility |
ASTM D1837; D2158; GPA 2140; ISO 13757 |
| ASTM D 1533 |
Water Content (Karl Fischer Titrator) |
ASTM D 1533, D4928, D6304, IP 386, IP 438, API MPMS |
รายการทดสอบและวิธีการทดสอบมาตรฐาน (Testing Description) เพิ่มเติม
| Test Code |
Test Description |
Test Method |
| D4294 |
Sulfur content by X-Ray Fluorescence Analyzer (XRF) |
ASTM D4294 |
| FAME |
FAME content |
|
| Gasohol |
Gasohol content |
|
| AOCS Cc13E-92 |
Color measurement by RYBN |
BS 684 section 1.14 and AOCS Method Cc 13e-92 |
| AOCS Dd 5 |
Color measurement by Klett |
AOCS Dd 5 |
| RI-BRIX |
Refractive index – Brix |
|
| RI |
Refractive index – RI |
|
| D5800-B |
Noack Test |
ASTM D5800 Method B |
| VIS-BF |
Brookfield Viscosity |
|
| D3279 |
Asphaltene content |
D6560, JPI-5S-45-95, IP143, D3279 |
|
